A SCIRC t1 continuously captures images which are viewable from any web browser. The SCIRC t1 is battery powered and works anyplace a cell phone works, allowing you to put a web camera anywhere. Images captured by a SCIRC t1 can be kept private or shared.
The embedded GPRS/EDGE High-Speed modem allows the SCIRC t1 to send images directly to the internet. This means you can put a SCIRC anyplace your cell phone works, at a job site, in an automobile or your backyard.
Include images captured from your SCIRC on your own website, directions are found here
A SCIRC t1 continuously captures images while turned on, these images are viewable from any web browser. Images captured by a SCIRC t1 can either be kept private or shared.
A 1.3 megapixel camera allows the SCIRC t1 to capture images up to 1280x1024. These hi definition images provide considerably more detail then the best web cameras.
We provide every user of a SCIRC t1 with a web page where they can control their SCIRCs. This web page is password protected to insure images are kept private. The remote control web page allows you to place a SCIRC anyplace and control it from your computer, your web enabled cell phone, or anyplace you can access the web!
Up to 150 megabytes of images are stored online for each SCIRC t1. This provides about 3 days worth of images while operating under normal conditions. If you want to keep you images longer, feel free to download them to your computer.
The large rechargeable battery included with every SCIRC t1 provides enough power to run a SCIRC for 5 days. The battery can be replaced with a freshly charges one, or the SCIRC t1 can be plugged in and charged while it runs.
The provided wall power jack can keep a SCIRC t1 running forever or be used for occasional charging.
On the bottom of the SCIRC t1 is a standard threaded tripod mount. The SCIRC t1 can also be attached to pole or tree with a strap or zip tie.
The SCIRC t1 weighs 4.5 lbs, 7” tall by 4.5” wide an all black making it easy to put a SCIRC anyplace.